AllParts Licensed Replacement Jaguar Guitar Neck [MT]
AllParts licenced replacement neck for a Fender Jaguar. The AllParts product code is JGRO. As a licenced neck it has the correct Fender headstock shape, and the following specifications:
- 24" (610mm) scale
- 22 vintage frets
- Solid Maple neck, sanded, unfinished and ready to spray
- Rosewood fingerboard
- 7.25" (184mm) radius
- 1-5/8" (41.3mm)nut width
- 2-3/16" (55.6mm) heel width
- 0.340" (8.6mm) Tuning peg hole diameter
- Truss Rod adjustment at heel
- Neck thickness .85 (22mm) at first fret, .95 (24mm) at twelfth fret
All necks are made of the highest quality wood in either the United States or Japan. No two necks are exactly the same and may differ slightly from what is pictured. All necks have a Limited Warranty against defects in materials and workmanship. Warranty does not cover normal fret wear or customer modifications.
This neck is licensed to Allparts Music Corporation by Fender® Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender® and no Fender® warranty applies.
All necks may require fret leveling and polish, and may need to be fine tuned to fit your instrument. This is normal and not a defect. All necks should be carefully inspected prior to installation and/or modification. All wood is unique with individual growth patters. Allparts cannot warranty a neck that does not get a sealer/finish put on it, as humidity, sweat, and temperature can cause the neck to warp and twist.
Order any mix of 5 AllParts necks for 20% off; order 10 or more for 25% off!
This product hasn't received any reviews yet. Be the first to review this product!