AllParts Licensed Replacement Stratocaster Large Headstock Guitar Neck
AllParts licenced replacement neck for large headstock (CBS style) Fender Stratocasters. As a licenced neck it has the correct Fender large headstock shape. These necks are made in Japan from the highest quality woods (Maple, Rosewood and, on some, Ebony). They are supplied unsealed and unfinished, but are sanded ready for spraying or coating with the finish of your choice.
Order any mix of 5 AllParts necks for 20% off; order 10 or more for 25% off!
A few configurations are available as standard on AllParts replacement large headstock Stratocaster® necks, please use the table below as a reference and then select your required spec using the drop down boxes above.
|Our SKU||AllParts SKU||Handed||Neck Wood||Fingerboard||#Frets & Type||Radius||Shape||Nut Width||Heel Width||Tuning Hole Diameter||Truss Rod||Thickness @ 1st/12th|
|LMO||Right||Maple||Maple||21 Vintage||7-1/4"||D||1-5/8"||2-3/16"||0.340"||Bullet, at head||0.87" / 0.96"|
|LRO||Right||Maple||Rosewood||21 Vintage||7-1/4"||D||1-5/8"||2-3/16"||0.340"||at heel||0.85" / 0.97"|
|LT4734||LRO-B||Right||Maple||Rosewood||21 Vintage||7-1/4"||D||1-5/8"||2-3/16"||0.340"||Bullet, at head||0.85" / 0.97"|
AllParts Stratocaster® neck nut slots are machined for USA spec nuts with a curved bottom. The tuning hole diameter of 11/32" is to fit USA spec tuners such as those from Grover, Kluson and most Gotoh. Conversion bushings can be used if metric import spec tuners are preferred. Truss rod access for all AllParts necks is at the heel, and all have a heel width of 2-3/16" to fit USA specification bodies. Stratocaster® necks have a curved end to the heel and so will not fit, as standard, Telecaster® style bodies.
Because of the natural variations in wood no two necks will be exactly the same - their grain patterns will vary. The neck pictured is an example of one, but is not the exact neck you will receive. All necks have a Limited Warranty against defects in materials and workmanship. Warranty does not cover normal fret wear or customer modifications. Unless otherwise noted, this neck is licensed to Allparts Music Corporation by Fender® Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender® and no Fender® warranty applies.
This product hasn't received any reviews yet. Be the first to review this product!